Skip to content
Nuvologic Electronics, home Discuss your requirement

Electronic product development company · Pune, India

From concept to creation.

Complete electronic product engineering. Under one roof.

From initial feasibility and electronic hardware design to embedded firmware, PCB engineering, mechanical integration and product validation, Nuvologic helps equipment manufacturers transform their ideas into engineered electronic products.

An engineer replies within one working day · NDA on request before you share details

  • 25 engineers
  • ISO 9001:2015 certified
  • OEM programmes in India, USA, Mexico, Singapore
  • Since 2022
An industrial controller shown half as a concept line drawing and half as the finished, enclosed product
Illustrative controller, rendered for this page

The engineering journey

One product, from first idea to finished device

Follow one controller through the eight stages we take a product through. They are shown one after another for clarity. In a real project, hardware, firmware and mechanical work run in parallel, with design reviews between them.

Skip the journey
  1. Concept line drawing of an industrial controller beside its requirement list: digital inputs and outputs, analog inputs, Ethernet, RS-485, CAN, 24 V supply and DIN-rail mounting

    01Concept & requirements Every great product begins with an idea.

    We understand your application, technical objectives, operating environment and product requirements.

    You receiveA reviewed requirement list and the open points to resolve

  2. The controller split into functional blocks around the microcontroller: power, digital inputs, analog and sensor inputs, control outputs and communications

    02Technical feasibility Engineering the right solution before building it.

    We evaluate architecture, technology choices, component availability, development risks and cost objectives before committing to the design.

    You receiveSystem architecture, scope and milestones in the proposal

  3. Six schematic sheets laid out on the board outline: power supply, microcontroller, isolated digital inputs, analog front end, output drivers and communication interfaces

    03Schematic design From system architecture to electronic circuits.

    Our hardware engineering process translates functional requirements into designed electronic circuits: power supplies, processing, isolated inputs, analog front ends, output drivers and communication interfaces.

    You receiveReviewed schematics and a bill of materials

  4. The assembled circuit board: copper traces, vias and gold pads, with the microcontroller, terminal blocks, Ethernet jack and supporting parts placed

    04PCB design & layout Precision at every layer.

    We engineer PCB layouts with attention to signal integrity, thermal behaviour, EMC considerations, routing constraints and manufacturing requirements. Our team has laid out boards from two to eight layers.

    You receivePCB layout with fabrication and assembly files

  5. The board powered up: status and I/O LEDs lit, signals moving along the traces, and a first-boot log from the firmware

    05Embedded firmware Bringing the electronics to life.

    We develop device drivers, communication interfaces, application logic, diagnostics and embedded software that bring hardware functionality to life.

    You receiveTested firmware for your hardware, with its update method

  6. Exploded CAD view: front cover with light pipes above, the board on four standoffs, the base with its DIN-rail clip below, and the fasteners

    06Mechanical 3D design Where electronics meet mechanical engineering.

    We integrate electronics with mechanical and enclosure design to support practical assembly, installation and product usability: board mounting, connector access, clearances, light pipes and ventilation.

    You receiveAn enclosure design checked against the PCB, with 3D-printed pilot parts where needed

  7. The enclosed prototype on the bench with a functional test procedure in progress and an RS-485 signal trace

    07Prototype & testing Built to be tested. Refined to perform.

    We prototype, debug and validate the hardware and firmware, resolving issues before design release. Functional, integration, stress and long-duration tests run against the requirements agreed at the start.

    You receiveWorking prototypes and test results against your requirements

  8. The finished controller in its enclosure, with status and I/O indicators lit through the front panel

    08Finished product Your vision. Engineered into reality.

    From initial concept to a validated product design, Nuvologic brings essential engineering disciplines together to develop practical electronic solutions, then supports the move into production.

    You receiveA validated design, prepared for manufacture

Built by this process

The controller above is illustrative artwork drawn for this page, not a catalogue product. These are real: hardware our team designed and delivered.

Nuvologic products

Two products, built by the same engineering team

A controller matched to your machine, and a gateway that connects the machines you already have. Each has its own enquiry questions, so the right engineers see your requirement from the start.

Customized Nuvologic PLCs

Control solutions designed for your machines.

PLC hardware and control firmware built around your machine, starting from the NX-2AI-IOT reference configuration: 8 digital inputs and 8 digital outputs at 24 V DC, 2 analog inputs, and Modbus RTU, ASCII and TCP.

Suited to
Machine OEMs who build the same machine repeatedly and want a controller matched to it.
To start, share
I/O count and types, communication needs, the machine sequence and expected quantity.
  • I/O, signal types and interfaces matched to the machine, so no unused modules on every unit
  • Control firmware and operator software from the same team; white-label branding available
  • Sketch your I/O online and send it to an engineer. Open the configurator
A Nuvologic PLC controller board with pluggable I/O terminals along both sides
NUVOLOGIC PLC · CONTROLLER BOARD

Engineering projects

Three systems our team designed and delivered

One case for each kind of work we do. Customer names stay confidential; the engineering is shown as built.

All six case files

The in-motion weighing controller with its display, designed by Nuvologic
  1. Analog I/O
  2. LPC1788 · RTOS
  3. Modbus RTU/TCP
  4. Azure · Android

CASE 01 Industrial weighing · hardware, firmware, software

In-motion weighing controller

Challenge
Capture vehicle weight in motion, at line speed, with repeatable industrial accuracy.
Approach
One weighing controller: a six-layer LPC1788 (Cortex-M3) main board among four PCBs, RTOS firmware with emWin GUI and PID control, and an ASP.NET application.
Delivered
Four PCBs, bootloader and application firmware, Azure storage, dashboards and an Android app.
Validation
Field-deployed and in daily use.

OutcomeInstalled in weighbridges and in-line checkweighers, handling around 1,000 vehicle readings a day.

Read the case file
Operator console of the inspection machine: gauges and readouts for bore, journal and height with pass or fail lamps
  1. Gauges
  2. Nuvologic PLC
  3. Control firmware
  4. .NET console

CASE 06 Industrial inspection · customized PLC

Inspection system controller and operator software

Challenge
Show live gauging results, a pass or fail verdict, and the trend of those measurements on one machine.
Approach
A customized Nuvologic PLC runs the machine sequence; a .NET operator console shows parameters, mastering, trends and reports.
Delivered
PLC hardware, control firmware and the operator software, from one team.
Validation
Mastering and pass/fail views are built into the operator console.

OutcomeDeployed in India, running the machine sequence with live gauging, mastering and pass/fail reporting.

Read the case file
  1. RTOS firmware · OTA
  2. Wi-Fi · BLE
  3. MQTT · HTTPS · TLS
  4. Azure · Android · iOS

System outline, drawn from the project description

CASE 03 Connected devices · firmware, apps, cloud

Home automation controller

Challenge
A connected-home controller that stays usable when the internet drops and takes OTA updates without field failures.
Approach
Local Wi-Fi and Bluetooth control on the device, MQTT or HTTP over TLS to Azure, with Android, iOS and web apps.
Delivered
Device firmware, Android and iOS apps, and the cloud side of the product.
Validation
Offline command path, signed firmware updates, a per-unit self-test and staged OTA waves.

OutcomeAbout 10,000 units a year in the field; OTA updates roll forward without field failures.

Read the case file

Why OEMs work with Nuvologic

Built for engineers. Trusted through execution.

What working with us looks like in practice. Each point links to the project or product that shows it.

FAQs

Questions buyers ask first

Something else to check? Call +91 73500 20304 or email info@nuvologic.in.

What kinds of projects do you take on?

New electronic products and changes to existing ones: feasibility, hardware and PCB design, embedded firmware, mechanical and enclosure integration, IoT connectivity, integration and testing, and production support. We also supply the Nuvolink IoT gateway and customized Nuvologic PLCs.

Can you work on an existing product?

Yes. We support improvements to existing products as well as new development, including firmware changes, hardware revisions and testing.

Do you do the mechanical and enclosure design as well?

Yes. Our mechanical and DFM engineers design the enclosure around the PCB, covering board mounting, connector access, clearances, light pipes and ventilation, and produce 3D-printed pilot parts where needed. Tooling and volume production of the enclosure are agreed per project.

Is a customized PLC the same as PLC programming or panel building?

No. A customized Nuvologic PLC is the controller hardware itself, adapted to your application, with the control firmware we write for your machine. It is not a panel assembly service. If your team needs to program the controller itself, say so in your enquiry; the four PLC routes explain the difference.

How do I find out whether Nuvolink suits my equipment?

Send us the equipment you need to connect, the interfaces or protocols it offers, the data you need and where that data should go, or map it with the data path tool. An engineer checks each device and tells you what connects and how.

Can we sign an NDA before sharing details?

Yes. Tick the NDA option in the enquiry form, or mention it when you call. We agree the non-disclosure agreement first, and you share detailed drawings, specifications or code after that.

Do you manufacture the product, or hand over to our manufacturer?

We build prototypes and pilot units, prepare the design for manufacture and test, and support the hand-off to your contract manufacturer. How volume production is arranged is agreed for each project.

What should I include in an enquiry?

A short description of the product or machine, the stage you are at, any interface or I/O requirements, expected quantities and your target timeline. Specifications, block diagrams or existing documents help us understand the requirement. Please leave out confidential details until we have agreed how to share them.

Do you work with startups as well as established manufacturers?

Yes. We work with startups, SMEs and large enterprises, and adapt our approach to the scale and requirements of the project.

Do you provide support after the project?

Yes. We offer maintenance, troubleshooting and feature enhancements after deployment, and long-term support based on your needs.

Start a conversation

Have an electronic product idea?

Share your requirements with our engineering team and explore the right approach for your next product.

  1. An engineer replies within one working day, by email or phone.
  2. We arrange a technical discussion if it suits what we do.
  3. We agree scope and next steps with you before any work starts.

Office No. B & C, 2nd Floor, Sr. No. 98, Prakash Landmark, Opp. Panjarpol, Pune-Nashik Highway, Bhosari, Pune 411039, Maharashtra, India

Service area: We work with engineering and manufacturing teams in Pune, Pimpri-Chinchwad (PCMC), Bhosari, Chakan and Ranjangaon, and across India. Office and factory addresses

Discuss your requirement

Choose a topic, such as product development, a customized PLC or Nuvolink, and the form asks only the questions that matter for it.

    About the equipment

    About the controller

    About the project

    Scope needed (optional)

    Timeline, quotation or NDA (optional)

    We use these details only to respond to your enquiry. See our privacy policy.